###
### Sun Aug 7 06:11:34 EDT 2005:
### /usr/pkg/bin/bmake bulk-package for libhydrogen-0.8.0nb1
### Current pkg count: 6 installed packages: digest-20050323 gettext-lib-0.11.5nb4 gmake-3.80nb4 libiconv-1.9.2nb1 libtool-base-1.5.18nb3 pkg_install-info-4.5nb3
###
BULK> Full rebuild in progress...
BULK> Cleaning package libhydrogen-0.8.0nb1 and pre-requisite packages
===> Cleaning for libhydrogen-0.8.0nb1
===> Cleaning for libaudiofile-0.2.6nb1
===> Cleaning for libtool-base-1.5.18nb3
===> Cleaning for gmake-3.80nb4
===> Cleaning for gettext-lib-0.11.5nb4
===> Cleaning for libiconv-1.9.2nb1
===> Cleaning for pkg_install-info-4.5nb3
BULK> Removing installed packages which are not needed to build libhydrogen-0.8.0nb1
BULK> Keeping BULK_PREREQ: digest-20050323 (pkgtools/digest)
BULK> libhydrogen-0.8.0nb1 requires installed package libiconv-1.9.2nb1 (converters/libiconv) to build.
BULK> libhydrogen-0.8.0nb1 requires installed package gmake-3.80nb4 (devel/gmake) to build.
BULK> libhydrogen-0.8.0nb1 requires installed package libtool-base-1.5.18nb3 (devel/libtool-base) to build.
BULK> libhydrogen-0.8.0nb1 requires installed package gettext-lib-0.11.5nb4 (devel/gettext-lib) to build.
BULK> libhydrogen-0.8.0nb1 requires installed package pkg_install-info-4.5nb3 (pkgtools/pkg_install-info) to build.
BULK> Installing packages which are required to build libhydrogen-0.8.0nb1.
BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg /packages/SunOS-5.8/sparc/All/libaudiofile-0.2.6nb1.tgz
BULK> Required package libtool-base-1.5.18nb3 (devel/libtool-base) is already installed
BULK> Required package gmake-3.80nb4 (devel/gmake) is already installed
BULK> Required package gettext-lib-0.11.5nb4 (devel/gettext-lib) is already installed
BULK> Required package libiconv-1.9.2nb1 (converters/libiconv) is already installed
BULK> Required package pkg_install-info-4.5nb3 (pkgtools/pkg_install-info) is already installed
BULK> Required package digest-20050323 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (libhydrogen-0.8.0nb1)
===> Checking for vulnerabilities in libhydrogen-0.8.0nb1
=> Checksum SHA1 OK for libhydrogen-0.8.0.tar.gz.
=> Checksum RMD160 OK for libhydrogen-0.8.0.tar.gz.
work -> /pkgobj/audio/libhydrogen/work
===> Extracting for libhydrogen-0.8.0nb1
===> Required installed package libaudiofile>=0.2.6nb1: libaudiofile-0.2.6nb1 found
===> Required installed package libtool-base>=1.5.18nb1: libtool-base-1.5.18nb3 found
===> Required installed package gmake>=3.78: gmake-3.80nb4 found
===> Patching for libhydrogen-0.8.0nb1
===> Applying pkgsrc patches for libhydrogen-0.8.0nb1
===> Overriding tools for libhydrogen-0.8.0nb1
===> Creating toolchain wrappers for libhydrogen-0.8.0nb1
===> Configuring for libhydrogen-0.8.0nb1
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
-----------------------------------------------------------------
Starting libHydrogen 0.8.0 configuration...
-----------------------------------------------------------------
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking for gawk... /usr/bin/nawk
checking whether make sets $(MAKE)... yes
checking for sparc-sun-solaris2-strip... no
checking for strip... strip
checking for sparc-sun-solaris2-g++... CC
checking for C++ compiler default output... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... no
checking whether CC accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of CC... none
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking build system type... sparc-sun-solaris2.8
checking host system type... sparc-sun-solaris2
checking for sparc-sun-solaris2-gcc... cc
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking for cc option to accept ANSI C... none needed
checking dependency style of cc... none
checking for non-GNU ld... /pkgobj/audio/libhydrogen/work/.wrapper/bin/ld
checking if the linker (/pkgobj/audio/libhydrogen/work/.wrapper/bin/ld) is GNU ld... no
checking for /pkgobj/audio/libhydrogen/work/.wrapper/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking for a sed that does not truncate output... /usr/pkg/bin/nbsed
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking command to parse nm output... failed
checking how to run the C preprocessor... cc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for sparc-sun-solaris2-ranlib... no
checking for ranlib... ranlib
checking for sparc-sun-solaris2-strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -KPIC
checking if cc PIC flag -KPIC works... yes
checking if cc static flag -Bstatic works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking whether the linker (/pkgobj/audio/libhydrogen/work/.wrapper/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking dynamic linker characteristics... solaris2 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
checking for pthread_create in -lpthread... yes
checking for audiofile-config... /usr/pkg/bin/audiofile-config
checking for Audio File Library - version >= 0.2.3... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libhydrogen.lsm
config.status: creating libhydrogen.spec
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating data/demo_songs/Makefile
config.status: creating data/drumkits/Makefile
config.status: creating data/drumkits/GMkit/Makefile
config.status: creating config.h
config.status: executing depfiles commands
-----------------------------------------------------------------
libhydrogen 0.8.0 configuration:
-----------------------------------------------------------------
Source code location: .
Compiler: cc
Prefix /usr/pkg
Data dir /usr/pkg/share/hydrogen/data
Use ALSA Sequencer: no
Debug messages: no
Jack support: no
OSS support: yes
-----------------------------------------------------------------
Now type make to build libhydrogen.
-----------------------------------------------------------------
If you're not a member of hydrogen-dev mailing list yet, please join.
Please see http://hydrogen.sourceforge.net for details.
===> Building for libhydrogen-0.8.0nb1
cd . && /bin/ksh /pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/missing --run aclocal-1.6
WARNING: `aclocal' is missing on your system. You should only need it if
you modified `acinclude.m4' or `configure.ac'. You might want
to install the `Automake' and `Perl' packages. Grab them from
any GNU archive site.
cd . && \
/bin/ksh /pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/missing --run automake-1.6 --gnu Makefile
WARNING: `automake' is missing on your system. You should only need it if
you modified `Makefile.am', `acinclude.m4' or `configure.ac'.
You might want to install the `Automake' and `Perl' packages.
Grab them from any GNU archive site.
cd . && /bin/ksh /pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/missing --run autoconf
WARNING: `autoconf' is missing on your system. You should only need it if
you modified `configure.ac'. You might want to install the
`Autoconf' and `GNU m4' packages. Grab them from any GNU
archive site.
/bin/ksh ./config.status --recheck
cd . && /bin/ksh ./config.status Makefile
config.status: creating Makefile
/bin/ksh ./config.status --recheck
cd . && /bin/ksh /pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/missing --run autoheader
WARNING: `autoheader' is missing on your system. You should only need it if
you modified `acconfig.h' or `configure.ac'. You might want
to install the `Autoconf' and `GNU m4' packages. Grab them
from any GNU archive site.
touch ./config.h.in
cd . && /bin/ksh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
/usr/pkg/bin/gmake all-recursive
gmake[1]: Entering directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0'
/bin/ksh ./config.status --recheck
Making all in src
gmake[2]: Entering directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/src'
cd .. && /bin/ksh ./config.status src/Makefile depfiles
config.status: creating src/Makefile
config.status: executing depfiles commands
gmake[2]: Leaving directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/src'
gmake[2]: Entering directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/src'
source='JackDriver.cpp' object='JackDriver.lo' libtool=yes \
depfile='.deps/JackDriver.Plo' tmpdepfile='.deps/JackDriver.TPlo' \
depmode=none /bin/ksh ../depcomp \
/bin/ksh ../libtool --mode=compile CC -DHAVE_CONFIG_H -I. -I. -I.. -DDEVOSSAUDIO="\"/dev/audio\"" -I/usr/pkg/include -I/usr/include -O2 -c -o JackDriver.lo `test -f 'JackDriver.cpp' || echo './'`JackDriver.cpp
mkdir .libs
CC -DHAVE_CONFIG_H -I. -I.. -DDEVOSSAUDIO=\"/dev/audio\" -I/pkgobj/audio/libhydrogen/work/.buildlink/include -O2 -c JackDriver.cpp -KPIC -DPIC -o .libs/JackDriver.o
CC -DHAVE_CONFIG_H -I. -I.. -DDEVOSSAUDIO=\"/dev/audio\" -I/pkgobj/audio/libhydrogen/work/.buildlink/include -O2 -c JackDriver.cpp -o JackDriver.o >/dev/null 2>&1
source='OssDriver.cpp' object='OssDriver.lo' libtool=yes \
depfile='.deps/OssDriver.Plo' tmpdepfile='.deps/OssDriver.TPlo' \
depmode=none /bin/ksh ../depcomp \
/bin/ksh ../libtool --mode=compile CC -DHAVE_CONFIG_H -I. -I. -I.. -DDEVOSSAUDIO="\"/dev/audio\"" -I/usr/pkg/include -I/usr/include -O2 -c -o OssDriver.lo `test -f 'OssDriver.cpp' || echo './'`OssDriver.cpp
CC -DHAVE_CONFIG_H -I. -I.. -DDEVOSSAUDIO=\"/dev/audio\" -I/pkgobj/audio/libhydrogen/work/.buildlink/include -O2 -c OssDriver.cpp -KPIC -DPIC -o .libs/OssDriver.o
"OssDriver.h", line 38: Error: Could not open include file.
"PreferencesMng.h", line 89: Warning: bufferSize hides PreferencesMng::bufferSize.
"PreferencesMng.h", line 95: Warning: audioDriver hides PreferencesMng::audioDriver.
"PreferencesMng.h", line 101: Warning: sampleRate hides PreferencesMng::sampleRate.
"PreferencesMng.h", line 107: Warning: useMetronome hides PreferencesMng::useMetronome.
"PreferencesMng.h", line 113: Warning: metronomeVolume hides PreferencesMng::metronomeVolume.
"Sample.h", line 85: Warning: filename hides Sample::filename.
"OssDriver.cpp", line 82: Warning: processCallback hides OssDriver::processCallback.
"OssDriver.cpp", line 119: Error: SNDCTL_DSP_SYNC is not defined.
"OssDriver.cpp", line 124: Error: SNDCTL_DSP_SAMPLESIZE is not defined.
"OssDriver.cpp", line 129: Error: SNDCTL_DSP_SPEED is not defined.
"OssDriver.cpp", line 134: Error: SNDCTL_DSP_STEREO is not defined.
"OssDriver.cpp", line 143: Error: SNDCTL_DSP_SETFRAGMENT is not defined.
"OssDriver.cpp", line 145: Error: SNDCTL_DSP_GETBLKSIZE is not defined.
"OssDriver.cpp", line 153: Warning: The variable bs has not yet been assigned a value.
"OssDriver.cpp", line 159: Error: AFMT_S16_LE is not defined.
"OssDriver.cpp", line 160: Error: SNDCTL_DSP_SETFMT is not defined.
"OssDriver.cpp", line 171: Warning (Anachronism): Formal argument 3 of type extern "C" void*(*)(void*) in call to pthread_create(unsigned*, const _pthread_attr*, extern "C" void*(*)(void*), void*) is being passed void*(*)(void*).
9 Error(s) and 9 Warning(s) detected.
gmake[2]: *** [OssDriver.lo] Error 1
gmake[2]: Leaving directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0/src'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/pkgobj/audio/libhydrogen/work/libhydrogen-0.8.0'
gmake: *** [all] Error 2
*** Error code 2
Stop.
bmake: stopped in /usr/pkgsrc/audio/libhydrogen
===>
===> There was an error during the ``build'' phase.
===> Please investigate the following for more information:
===> * log of the build
===> * /pkgobj/audio/libhydrogen/work/.work.log
===>
*** Error code 1
Stop.
bmake: stopped in /usr/pkgsrc/audio/libhydrogen
Please view the work log for libhydrogen-0.8.0nb1
BULK> libhydrogen-0.8.0nb1 was marked as broken: -rw-r--r-- 1 root other 13184 Aug 7 06:13 .broken.html /usr/pkg/bin/bmake deinstall ===> Deinstalling for libhydrogen BULK> Marking all packages which depend upon libhydrogen-0.8.0nb1 as broken: BULK> marking package that requires libhydrogen-0.8.0nb1 as broken: hydrogen-0.8.0nb1 (audio/hydrogen) BULK> Build for libhydrogen-0.8.0nb1 was not successful, aborting.